Rockwell based WinRPI 14400 bps Modem String Explaination
Rockwell based WinRPI 14400 bps Modem
AT&F&C1&D3&K3+H3
AT: (beginning of most inits) Attention!
&F: Sets the values loaded in the active profile to the values that are set in the default profile.
&C1: DCD enabled after a carrier signal is detected
&D3: DTR drop causes the modem to be reinitialized
&K3: Enable RTS/CTS flow control
+H3: Enable RPI and set computer speed to 57600 bps
This page was last modified on Saturday, 05-Feb-2011 15:13:13 EST.
|
